XHP impants

by Jenpops 9th December 2013, 1:41 pm

If I have a round 430 XHP implant I am bound to get that line at the top of my bust aren't I?

I want a bit of projection, but not the obvious line (stuck on look).

x

by 2522laura 9th December 2013, 1:53 pm

Your consultant will be able to advise for sure but I have xhp unders and have no line at the top of my bust. I made it very clear to my surgeon I didnt want them to look fake. This is why he put them under, as I dont have much breast tissue. I believe if you have enough breast tissue you can have them over and still be ok x

by 2522laura 9th December 2013, 1:54 pm

I think you saw my picture trail if you want to have another look x

by Jenpops 9th December 2013, 2:11 pm

Thanks Laura, so you had Extra High Profile did you? Is that what TRX means?

I'm having unders, just don't know if to go for 430 XHP rounds (he said my nipple might not be dead centre if I have these, lower size is 360, feel might be too small for what I want).

Or 425 XHP anatomical..

I might have looked yeah, will check and will have a look at your pics again thanks.

How you getting on?

x
x

by **Charlii** 9th December 2013, 2:11 pm

Unless you've asked for an obvious stuck on look, you wont get one. Yes, for the first few weeks - couple of months, they will look like this as they will be held so high to your chest. But once they drop, they wont. This has nothing to do with projection.

I have XHP, but unless I give them a good hoiking, I have a natural slope and no line at the top.

by **Charlii** 9th December 2013, 2:13 pm

FYI, TRX means Textured (shell) Responsive (Fill) Xtra (high profile)

by Jenpops 9th December 2013, 2:17 pm

Thanks Charli..

I am the most indecisive person I know. I need someone to make this decision for me!!! arrgh! lol seeing stars

x

by jenniferrf1 9th December 2013, 2:37 pm

You won't get a stuck on look unless you've asked for it... High profile doesn't mean you have a stuck on look, it's all to do with your breast width diameter... You've been offered high as yours must be quite small... Don't worry, many of us have high profiles and it won't give you a fake look at all x

by **COOKIE** 9th December 2013, 3:14 pm

Generally with profiles, the slimmer you are, the higher the profile, so that's that are very slim would generally be given the XHP because the have the smallest Breast Width Diameter.

Because the implant base has to 'fit' your body your surgeon chooses the implant that's best going to do that... So profiles don't make the results extra high, it just applies to the dimentions of the implant and you will have just as natural of a result as a woman with a wider breast width having low profiles would.

Its all about the 'fit' babel xx

by Jenpops 9th December 2013, 4:30 pm

Thanks ladies.

I just don't know now whether to go for round or anatomical?

I would defo go for the round if he hadn't mentioned my nipple position. He said that as my lower breast, nipple to crease is only 60mm, he said the measurement of the implant (430cc), 91mm, crease to mid point of implant, may make my nipple a bit lower as not sure if my skin will stretch another 30mm..

I personally think I have stretchy skin and it might not be a prob..
Projection on that implant is 61mm

Where as the anatomical crease to mid point is 79mm so nipple will sit higher than on round. The projection on this is 63mm too (425cc implant)

what would you gals do? I know it has to be my decision but I am interested in your thoughts?

xx

by jenniferrf1 9th December 2013, 4:35 pm

What has your surgeon said his choice would be? Surely he wouldn't say you can have both it's up to you... He would have a preference?
Ild go back and see him again to talk it over... It's not really something we should choose because it's the surgeon who's the expert and knows what is right for you...
Have you seen other surgeons to see what their advice would be?
X

by **COOKIE** 9th December 2013, 4:42 pm

I don't think I've heard of nipples sitting "lower" post-op hun. Nipple position with a round implant is generally always going to sit in the same position afterwards.

You will get a little lift from an anatomical implant but if you're looking for an implant that will give the nipple a little lift and to keep the fullness that a round can give, then maybe discuss conical implants with your surgeon. These are great for very slim ladies and will give your nipple the little lift you might want but also give you the natural look you're after but also with the upper pole option you can have with a round implant also. Xx

by Jenpops 9th December 2013, 4:53 pm

changed my avi to pre op! Blush

Yes I have seen others. All but 1 said rounds and so did Hassan when I met with him and he had seem me in the flesh.

But when we spoke on the phone late last week. I said that I really didnt want the stuck on look, but did want upper pole. He then mentioned about nipple position with the round and suggested Anatomical as he felt it would have better nipple position.

Maybe I need to talk with him again. Or ask him to order both round and anatomical for the day? x

by **COOKIE** 9th December 2013, 4:59 pm

Ask him about the conical implant too if he feels your nipple could do with a little lift. These implants are great for that and from what you've said on here seem like the perfect compromise. Xx

by Jenpops 9th December 2013, 5:16 pm

Yes I will. Thanks.

Although just googled conical implants in the brand he uses Polytech and not sure they do a conical? x

by **COOKIE** 9th December 2013, 6:00 pm

There are polyeurothane conicals yes

I just looked at the polytech catalogue and think they're the 'Replicon' but not sure, they could be the 'Opticon'? So there are other options available to you with a round base but an anatomical projection. Xx

by Jenpops 9th December 2013, 6:42 pm

Yeah he mentioned it would be round base with anatomical projection xx

by **COOKIE** 9th December 2013, 7:36 pm

So not an anatomical implant then. Anatomicals have an oval base babe. So your surgeon must be talking about the conicals :ok:

by KayDeeStafford 9th December 2013, 8:02 pm

I jave XHP overs and no line at the top :) x

by Jenpops 9th December 2013, 9:01 pm

It's called an anatomical round base on the polytech info and website x

by Newbieboobie 9th December 2013, 9:36 pm

Yes my ps described mine as round anatomicals too, a bit confusing but they're a different shape to conicals xx

by Sponsored content

Sun	Mon	Tue	Wed	Thu	Fri	Sat
					1	2
3	4	5	6	7	8	9
10	11	12	13	14	15	16
17	18	19	20	21	22	23
24	25	26	27	28	29	30

XHP impants

XHP impants

Re: XHP impants

Re: XHP impants

Re: XHP impants

Re: XHP impants

Re: XHP impants

Re: XHP impants

Re: XHP impants

Re: XHP impants

Re: XHP impants

Re: XHP impants

Re: XHP impants

Re: XHP impants

Re: XHP impants

Re: XHP impants

Re: XHP impants

Re: XHP impants

Re: XHP impants

Re: XHP impants

Re: XHP impants

Re: XHP impants

Re: XHP impants